Factory Settings - DAB E.SWIM Installations- Und Wartungsanleitungen

7 FACTORY SETTINGS

The system leaves the factory with a series of preset parameters, which may be changed according to the requirements
of the plant and of the user. Each change of the settings is automatically saved in the memory.
The factory (or default) settings are summed up in the following table. You can make a note of the values modified for
your own installation in the "MEMO" column.
As indicated in the table, some default values may differ depending on the market for which the system is
intended.
If desired, it is possible to restore the default settings, proceeding as described in paragraph 6.1.
Function
Menus
1 Origin speed
1-2 Language
1-3 Time format
1-4 Unit of Measure
1-5 Pump Limits
1-6 SVRS
1-7 Screen
1-8 Password
2-1 Manual speed
2-1 SET1
2-1 SET2
2-1 SET3
2-1 SET4
2-2 Quick Clean
3-1 Timers Speeds
3-1 SET5
3-1 SET6
3-1 SET7
Factory settings
Parameter
Head Unit
Flow Unit
Temperature Unit
H max (head)
Q max (flow)
Restarting
Disabling time
Sleep Time
Back lighting
value
type of setpoint
setpoint Q
setpoint %
duration
setpoint Q
setpoint %
duration
setpoint Q
setpoint %
duration
setpoint Q
setpoint %
duration
Speed
Durata
Type of setpoint
setpoint Q
setpoint %
setpoint Q
setpoint %
setpoint Q
setpoint %
ENGLISH
Value (*)
Digital IN
English
24h AM PM
m (metres) ft (feet)
m3/h US GPM
°C °F
MAX
MAX
AUTO
15 min
1:00 h
100%
0 (not active)
Speed %
5 m3/h 20 GPM
50%
8 h (10 min - 18 h /)
12 m3/h 50 GPM
70%
4 h (10 min - 18 h /)
18 m3/h 80 GPM
85%
2 h (10 min - 18 h /)
25 m3/h 110 GPM
100%
1 h (10 min - 18 h /)
100%
10 min
Flow
5 m3/h 20 GPM
50%
12 m3/h 50 GPM
70%
18 m3/h 80 GPM
85%
70
MEMO