Main Page Of The Display (Homepage) - DAB E.SWIM Installations- Und Wartungsanleitungen


in the centre of the page is the list (or menu) of the various languages available, and the box shows the language
currently selected;

the vertical bar, represented on the left, shows the position where we are on the list (or menu) of the languages
available; in the example, we are in the first position and the sign on the bar is at the top;

the keys to use are indicated at the bottom (as well as the arrows which, for simplicity, are not shown):
o "OK" key [
o
"ESC" key [
made, it returns to the previous page.
As is intuitive, use the up arrow and down arrow keys to scroll through the list of languages to select the one you want,
then press "OK" [
WIZARD.
On some pages, such as the one with hours and minutes, the arrows also allow you to change the value displayed.
After having chosen the units of measure and, if necessary, set the limits of the flow rate and head, a page is shown
telling you that the Wizard is complete. By pressing "ESC" you can go back to review or change the settings; by pressing
"OK" you leave the Wizard and proceed to normal pump operation.

4.4 Main page of the display (homepage)

This is the appearance of the home page, which appears on the display in normal operating conditions and sums up all
the information on system operation.
1.
2.
3.
The information forms three groups:
1. The status lines (at the top) provide information on:
o the status (running, stopped) along with the current command (SET1 – SET3, QC, Timer A-H, etc.), or
any active Warnings and Faults; in the example in the figure: the pump is running for Timer D.
o the active setpoint value ("SP") and possibly the time expected for the end of the active function ("End").
In the example in the figure the setpoint is 12.0 m3/h and the pump will stop at 22:00.
2. The instantaneous values of the electrical and hydraulic magnitudes, which are grouped in the space in the
centre of the screen and continuously updated during operation.
3.
The rapid access bar (at the bottom): contains the date and time with some icons; you navigate on these
elements with the right arrow and left arrow keys, and move the selection (highlighted by the box), then press
"ENTER"
This gives simple and direct access to the items used most frequently, without having to scroll through the
menu. These are the items available and the functions accessed:
"Configuration"
o
o Current "Date and time"  direct change of date and time (paragraph 4.5.3),
"Timer"
o
"Key"
o
5.1; the symbol represents the current status:



]: confirms any changes made and allows you to proceed to the next page;
]: cancels any changes made; when you press it again, or if no changes have been
]. The selected language is activated and you proceed to the next page (number 2/11) of the
[ ]
 Menu access (see chapter 4.3),
 access to the Timers (paragraph 5.3),
(or padlock)  direct access to the protection system with Password, described in paragraph
(key) Password not entered, free access to all functions;
(closed padlock) Password entered and active, access to the control keys is prevented
(except the "RESET" key);
(open padlock) Password entered but temporarily deactivated, access is temporarily
allowed.
ENGLISH
Figure 7
to go
55
to the selected item.