Installation; Installing Of The Transmitting Unit - G&D CATVision Installation Und Bedienung

Guntermann & Drunck GmbH
3

Installation

The installation of CATVision and CATVision-MC differs in the number of
connectable video sources. As an installation example the manual focus is
therefore on the CATVision. The connection of additional video sources will be
explained separately.
3.1

Installing of the transmitting unit

Mouse port
for local console
Mouse PS/2
Red. Power
Keyb PS/2. 12V DC/0,6A
Connection for
the CAT-x cable
to the CATVision-CON
Port of the keyboard
for the local console

Disconnect monitor, keyboard and mouse from the computer.

Monitor:
Connect the 15 pole Sub HD connector of the
6 or 9 m) to the VGA interface of the computer.

Keyboard/Mouse (PS/2):
Establish a connection to the keyboard and mouse interface of the
computer by means of the two PS/2 connectors of the
Both connectors have corresponding symbols.
Alternativ

Keyboard/Mouse (USB)
Establish a connection to the keyboard and mouse interface of the
computer by means of the two USB connectors of the
AM/BM-2-cable
RS 232 Line In Line Out
Transmission Monitor
Port for the monitor
of the local console
Alternative: connection for keyboard/mouse
via USB-AM/BM-2 to the PC
USB K/M USB 1.1
Trans
CPU CPU
VGA Keyb. Mouse CPU
page 8
Operating Instructions
CATVision (MC)
Connection for the CPU-x cable
to the local PC; VGA, PS/2,
keyboard and PS/2 mouse
CPU-x cable
(x = 2, 4,
CPU-x cable.
USB-