Changing the OSD key
The hotkey to open the OSD consists of at least one hotkey modifier (see Changing
hotkeys on page 24) and an additional OSD key. You can freely select these keys
from a number of selectable keys.
You can change both the hotkey modifier
How to change the current OSD key:
1. Press
Ctrl+Num
2. Select the row
3. Select the row
4. Under
, press
Key
when pressing the OSD key together with the hotkey modifier(s):
Num
Num key (default)
Pause
Pause key
Insert key
Insert
Delete
Delete key
Home key
Home
End key
End
PgUp
Page Up key
Pace Down key
PgDn
Space
Space key
5. Press
to save your settings.
F2
1. Click on
KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click the
General
4. Under
, you can select an OSD key. The OSD key can be pressed
Hotkey
together with the hotkey modifier(s) to open the on-screen display.
Select the OSD key from the keys Pause, Insert, Delete, Home, Page Up,
Page Down, Num, End or Space.
5. Click
OK
to save your changes.
Ctrl
(default) to open the on-screen display.
System setup
and press
Hotkey
and press
Enter
to select an OSD key. Now you can open the OSD
F8
tab.
and the OSD key
Num
Enter
.
.
on the directory tree.
G&D DP-Vision-CAT · 25
Configuration
.