Changing The Osd Key - G&D DP-Vision-Fiber Installationanleitung Und Betriebsanleitung

Configuration

Changing the OSD key

The hotkey to open the OSD consists of at least one hotkey modifier (see Changing
hotkeys on page 26) and an additional OSD key. You can freely select these keys
from a number of selectable keys.
You can change both the hotkey modifier
How to change the current OSD key:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under
Key
when pressing the OSD key together with the hotkey modifier(s):
 Num key (default)
Num
Pause  Pause key
Insert  Insert key
Delete  Delete key
Home  Home key
End  End key
PgUp  Page Up key
PgDn  Pace Down key
 Space key
Space
5. Press F2 to save your settings.
1. Click on KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click the General
4. Under Hotkey
together with the hotkey modifier(s) to open the on-screen display.
Select the OSD key from the keys Pause, Insert, Delete, Home, Page Up,
Page Down, Num, End or Space.
5. Click to save your changes.
OK
27 · G&D DP-Vision-Fiber
(default) to open the on-screen display.
System setup and press
and press
Hotkey
, press to select an OSD key. Now you can open the OSD
F8
tab.
, you can select an OSD key. The OSD key can be pressed
Ctrl and the OSD key
Enter .
.
Enter
on the directory tree.
Num .