Enabling Or Disabling Ddc/Ci Support - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Configuration

Enabling or disabling DDC/CI support

The computer and user modules supported by the
ready to support monitors with
After the function has been activated, the DDC/CI information is transparently for-
warded to the monitor in order to support as many monitors as possible. However,
we cannot guarantee the support for all monitors.
How to configure the DDC/CI support of a user module:
1. Press Ctrl+Num
2. Select the row
3. Under DDC/CI support
disabled
CPU > monitor
bidirectional
4. Press F2 to save your settings.
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click
on Configuration
3. Click on the tab
4. When using a multi-channel device, click on the desired video channel and
then click on
5. Select one of the options given under
Disabled
CPU > monitor
Bidirectional
6. Click on
Save
41 · G&D VisionXS-IP-F-DP-UHR
DDC/CI functionality.
(default) to open the on-screen display.
Console setup and press
press F8 to select on of the following options:
 The transmission of DDC/CI signals is disabled (default).
 The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor
 The transmission of DDC/CI signals is carried out by
bidirectionally.
KVM extender
.
.
Video channels
.
Configuration
 The transmission of DDC/CI signals is disabled (default).
 The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor
 The transmission of DDC/CI signals is carried out by
bidirectionally.
.
VisionXS-IP-F-DP-UHR
Enter .
.
:
DDC/CI monitor
system are