Enabling Or Disabling Ddc/Ci Support - G&D VisionXS-F-DP-UHR Installation Und Bedienung

Configuration

Enabling or disabling DDC/CI support

The computer and user modules supported by the
ready to support monitors with
After the function has been activated, the DDC/CI information is transparently for-
warded to the monitor in order to support as many monitors as possible. However,
we cannot guarantee the support for all monitors.
How to configure the DDC/CI support of a user module:
1. Press Ctrl+Num
2. Select the row
3. Under DDC/CI support
disabled
CPU > monitor
bidirectional
4. Press to save your settings.
F2
1. In the menu, click on
2. Click twice on the computer module (
3. Click on the tab
4. Select one of the options given under
Disabled
CPU > monitor
Bidirectional
5. Click on Save
45 · G&D VisionXS-F-DP-UHR
functionality.
DDC/CI
(default) to open the on-screen display.
and press
Console setup
press F8 to select on of the following options:
 The transmission of DDC/CI signals is disabled (default).
 The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor
 The transmission of DDC/CI signals is carried out by
bidirectionally.
KVM extender
Video channels .
 The transmission of DDC/CI signals is disabled (default).
 The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor
 The transmission of DDC/CI signals is carried out by
bidirectionally.
.
VisionXS-F-DP-UHR
.
Enter
.
CPU ) you want to configure.
:
DDC/CI monitor
system are