Ip Vrrp Operation; Ip Vrrp Trap Auth-Failure - Hirschmann Hios-3S Rsp Referenzhandbuch

Virtual Router Redundancy Protocol
(VRRP)
43.1 ip
Set IP parameters.

43.1.1 ip vrrp operation

Enables or disables VRRP globally on the device.

Mode: Global Config Mode

Privilege Level: Operator

Format: ip vrrp operation

no ip vrrp operation
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no ip vrrp operation

43.1.2 ip vrrp trap auth-failure

Enable or disable the sending of a trap if this router detects an authentication
failure on any of its VRRP interfaces.

Mode: Global Config Mode

Privilege Level: Operator

Format: ip vrrp trap auth-failure
546
43.1 ip
RM CLI HiOS-3S RSP
Release 6.1 09/2016