Ip Rip Receive-Version - Hirschmann Hios-3S Rsp Referenzhandbuch

Routing Information Protocol (RIP)
Parameter Value
none
P-1
ripv1
rip1c
ripv2

42.2.6 ip rip receive-version

Configure the RIP version to receive RIP updates on an interface.

Mode: Interface Range Mode

Privilege Level: Operator

Format: ip rip receive-version <P-1>
Parameter Value
ripv1
P-1
ripv2
both
none
542
Meaning
Do not send RIP update on this interface.
Configure the send version type as ripv1.
Configure the send version type as rip1c.
Configure the send version type as ripv2.
Meaning
Configure the receive version type as ripv1.
Configure the receive version type as ripv2.
Configure the receive version type as both.
Do not receive RIP update on this interface.
42.2 ip
RM CLI HiOS-3S RSP
Release 6.1 09/2016