Dhcp-L2Relay; Dhcp-L2Relay Mode; Dhcp-L2Relay Circuit-Id - Hirschmann Hios-3S Rsp Referenzhandbuch

DHCP Layer 2 Relay

17.2 dhcp-l2relay

Group of commands that configure DHCP Layer 2 Relay on existing VLANs.

17.2.1 dhcp-l2relay mode

Enables or disables DHCP Layer 2 Relay on a VLAN.

Mode: VLAN Database Mode

Privilege Level: Operator

Format: dhcp-l2relay mode <P-1>
Parameter Value
1..4042
P-1

no dhcp-l2relay mode
Disable the option

Mode: VLAN Database Mode

Privilege Level: Operator

Format: no dhcp-l2relay mode

17.2.2 dhcp-l2relay circuit-id

This commands enables setting the Option-82 Circuit ID in DHCP messages
to an interface descriptor.

Mode: VLAN Database Mode

Privilege Level: Operator

Format: dhcp-l2relay circuit-id <P-1>
RM CLI HiOS-3S RSP
Release 6.1 09/2016
Meaning
Enter the VLAN ID.
17.2 dhcp-l2relay
259