Ip Arp-Inspection Bind-Check - Hirschmann Hios-3S Rsp Referenzhandbuch

Dynamic ARP Inspection
Parameter Value
1..4042
P-1

no ip arp-inspection log
Disable the option

Mode: VLAN Database Mode

Privilege Level: Operator

Format: no ip arp-inspection log <P-1>

12.3.3 ip arp-inspection bind-check

Enables or disables the DAI binding-check on a VLAN. If enabled, an ARP
frame received on an untrusted port (in a DAI enabled VLAN) is checked.
This test starts when a ARP ACL exists but the condition does not match in
the rule table and the ACL strict flag is not set or when the ARP ACL not exist.

Mode: VLAN Database Mode

Privilege Level: Operator

Format: ip arp-inspection bind-check <P-1>
Parameter Value
1..4042
P-1

no ip arp-inspection bind-check
Disable the option

Mode: VLAN Database Mode

Privilege Level: Operator

Format: no ip arp-inspection bind-check <P-1>
RM CLI HiOS-3S RSP
Release 6.1 09/2016
Meaning
Enter the VLAN ID.
Meaning
Enter the VLAN ID.
12.3 ip
207