Ip Rip Authentication Type; Ip Rip Authentication Key - Hirschmann Hios-3S Rsp Referenzhandbuch

Routing Information Protocol (RIP)
42.2 ip
IP interface commands.

42.2.1 ip rip authentication type

Configure the RIP authentication type.

Mode: Interface Range Mode

Privilege Level: Operator

Format: ip rip authentication type <P-1>
Parameter Value
none
P-1
simple
md5

42.2.2 ip rip authentication key

Configure the authentication key. Entering a key helps protect your network
information such as routing tables from being tampered with.

Mode: Interface Range Mode

Privilege Level: Operator

Format: ip rip authentication key <P-1>
Parameter Value
string
P-1
540
Meaning
Configure the authentication type as none
(Key and key ID is not required).
Configure the authentication type as simple
(Key ID is not required).
Configure the authentication type as md5 for
the interface.
Meaning
<key> Configure the authentication key.
42.2 ip
RM CLI HiOS-3S RSP
Release 6.1 09/2016