Hirschmann HiOS-3S RSP Referenzhandbuch Seite 1357

Routing Information Protocol (RIP)
[external-1]: Configure the router to re-distribute OSPF external-1 rou-
tes to other routers using RIP. OSPF external type 1 entries originate from
other protocols. External type 1 routes include the total cost, internal and
external, of the route. In order to re-distribute the routing table with this value,
first configure and enable ospf.
[external-2]: Configure the router to re-distribute OSPF external-2 rou-
tes to other routers using RIP. OSPF external type 2 entries originate from
other routing protocols or are static routes. External type 2 routes contain
solely the external cost of the route. In order to re-distribute the routing table
with this value, first configure and enable ospf.
[nssa-external-1]: Configure the router to re-distribute OSPF nssa-
external-1 routes to other routers using RIP. OSPF nssa external type 1
entries originate from other protocols and contain solely Not-So-Stubby-Area
routes. External type 1 routes include the total cost, internal and external, of
the route. In order to re-distribute the routing table with this value, first confi-
gure and enable ospf.
[nssa-external-2]: Configure the router to re-distribute OSPF nssa-
external-2 routes to other routers using RIP. OSPF nssa external type 2
entries originate from other protocols and contain solely Not-So-Stubby-Area
routes. External type 2 routes include solely the internal cost of the route. In
order to re-distribute the routing table with this value, first configure and
enable ospf.
Parameter Value
connected
P-1
static
ospf
1..15
P-2
enable
P-3
disable
enable
P-4
disable
enable
P-5
disable
enable
P-6
disable
enable
P-7
disable
538
Meaning
Select the source protocol as connected.
Select the source protocol as static.
Select the source protocol as OSPF.
Enter the metric.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
42.1 ip
RM CLI HiOS-3S RSP
Release 6.1 09/2016