Config Envm Load-Priority - Hirschmann Hios-3S Rsp Referenzhandbuch

Configuration
Parameter Value
sd
P-1
usb

no config envm config-save
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no config envm config-save <P-1>

11.2.8 config envm load-priority

Configure the order of configuration load attempts from memory devices at
boot time. If one load is successful, then the device discards further attempts.

Mode: Global Config Mode

Privilege Level: Operator

Format: config envm load-priority <P-1> <P-2>
Parameter Value
sd
P-1
usb
disable
P-2
first
second
184
Meaning
SD-Card
USB Storage Device
Meaning
SD-Card
USB Storage Device
Config will not be loaded at all
Config will be loaded first. If successful,
no other config will be tried.
Config will be loaded if first one does not
succeed.
11.2 config
RM CLI HiOS-3S RSP
Release 6.1 09/2016