Link-Aggregation; Link-Aggregation Add; Link-Aggregation Modify - Hirschmann Hios-3S Rsp Referenzhandbuch

IEEE 802.3ad (Dot3ad)

24.1 link-aggregation

Configure 802.3ad link aggregation parameters to increase bandwidth and
provide redundancy by combining connections.

24.1.1 link-aggregation add

Create a new Link Aggregation Group to increase bandwidth and provide link
redundancy. If desired, enter a name up to 15 alphanumeric characters in
length.

Mode: Global Config Mode

Privilege Level: Operator

Format: link-aggregation add <P-1>
Parameter Value
lag/<lagport>
P-1

24.1.2 link-aggregation modify

Modify the parameters for the specified Link Aggregation Group.

Mode: Global Config Mode

Privilege Level: Operator

Format: link-aggregation modify <P-1> name <P-2> addport
<P-3> deleteport <P-4> adminmode linktrap static has-
hmode <P-5> min-links <P-6>
name: Modify the name of the specified Link Aggregation Group.
addport: Add the specified port to the Link Aggregation Group.
deleteport: Delete the specified port from the Link Aggregation Group.
362
Meaning
lag/<lagport> Enter a lag interface in
lag/lagport format.
24.1 link-aggregation
RM CLI HiOS-3S RSP
Release 6.1 09/2016