Ip Rip Distribute-List; Ip Rip Re-Distribute - Hirschmann Hios-3S Rsp Referenzhandbuch

Routing Information Protocol (RIP)

42.1.7 ip rip distribute-list

Configure the distribute list for the routes from other source protocols.

Mode: Global Config Mode

Privilege Level: Operator

Format: ip rip distribute-list <P-1> <P-2> <P-3>
Parameter Value
out
P-1
connected
P-2
static
ospf
<1000..1099>
P-3

no ip rip distribute-list
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no ip rip distribute-list <P-1> <P-2> <P-3>

42.1.8 ip rip re-distribute

Configure the RIP route redistribution.

Mode: Global Config Mode

Privilege Level: Operator

Format: ip rip re-distribute <P-1> [metric <P-2>]
[internal <P-3>] [external-1 <P-4>] [external-2 <P-5>]
[nssa-external-1 <P-6>] [nssa-external-2 <P-7>]
[metric]: Configure the RIP route re-distribution metric parameters.
[internal]: Configure the router to re-distribute OSPF internal routes to
other routers using RIP. OSPF enters internal routes in the routing table for
routes originating within OSPF. In order to re-distribute the routing table with
this value, first configure and enable ospf.
RM CLI HiOS-3S RSP
Release 6.1 09/2016
Meaning
Configure as out to re-distribute routes
with ACL rules
Select the source protocol as connected.
Select the source protocol as static.
Select the source protocol as OSPF.
Enter the access list number.
42.1 ip
537