Ip Access-List Extended Name - Hirschmann Hios-3S Rsp Referenzhandbuch

Access Control List (ACL)
3.3 ip
Set IP parameters.
3.3.1

ip access-list extended name

Create an IP access-list.

Mode: Global Config Mode

Privilege Level: Operator

Format: ip access-list extended name <P-1> deny src <P-
2> [<P-3> <P-4>] dst <P-5> [<P-6> <P-7>] proto <P-8>
[flag [<P-9>] [<P-10>] [<P-11>] [<P-12>] [<P-13>] [<P-
14>] [<P-15>]] [icmp-type <P-16>] [icmp-code <P-17>]
[igmp-type <P-18>] [fragments] [precedence <P-19>]
[log] [time-range <P-20>] [assign-queue <P-21>] [tos
<P-22> <P-23>] [log] [time-range <P-24>] [assign-queue
<P-25>] [dscp <P-26>] [log] [time-range <P-27>]
[assign-queue <P-28>] every [log] [time-range <P-29>]
[assign-queue <P-30>] permit src <P-31> [<P-32> <P-
33>] dst <P-34> [<P-35> <P-36>] proto <P-37> [flag [<P-
38>] [<P-39>] [<P-40>] [<P-41>] [<P-42>] [<P-43>] [<P-
44>]] [icmp-type <P-45>] [icmp-code <P-46>] [igmp-type
<P-47>] [fragments] [precedence <P-48>] [time-range
<P-49>] [mirror <P-50>] [rate-limit <P-51> <P-52>]
[redirect <P-53>] [rate-limit <P-54> <P-55>] [tos <P-
56> <P-57>] [time-range <P-58>] [assign-queue <P-59>]
[mirror <P-60>] [rate-limit <P-61> <P-62>] [redirect
<P-63>] [rate-limit <P-64> <P-65>] [dscp <P-66>]
[time-range <P-67>] [assign-queue <P-68>] [mirror <P-
69>] [rate-limit <P-70> <P-71>] [redirect <P-72>]
[rate-limit <P-73> <P-74>] every [time-range <P-75>]
[assign-queue <P-76>] [mirror <P-77>] [rate-limit <P-
78> <P-79>] [redirect <P-80>] [rate-limit <P-81> <P-
82>]
RM CLI HiOS-3S RSP
Release 6.1 09/2016
3.3 ip
119