15Ip Ospf Re-Distribute - Hirschmann Hios-3S Rsp Referenzhandbuch

Open Shortest Path First (OSPF)

41.1.15ip ospf re-distribute

Configure the OSPF route re-distribution. An ASBR is able to translate infor-
mation from other OSPF processes in separate areas and routes from other
sources, such as static routes or other dynamic routing protocols, into the
OSPF protocol.

Mode: Global Config Mode

Privilege Level: Operator

Format: ip ospf re-distribute <P-1> [metric <P-2>] [met-
ric-type <P-3>] [tag <P-4>] [subnets <P-5>]
[metric]: Configure the OSPF route re-distribution metric parameters.
[metric-type]: Configure the OSPF route redistribution metric-type.
[tag]: Configure the OSPF route redistribution tag parameters.
[subnets]: Allow the router to redistribute subnets into OSPF.
Parameter Value
connected
P-1
static
rip
0..16777214
P-2
1..2
P-3
0..4294967295
P-4
enable
P-5
disable

no ip ospf re-distribute
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no ip ospf re-distribute <P-1> [metric] [met-
ric-type] [tag] [subnets]
516
Meaning
Select the source protocol as connected.
Select the source protocol as static.
Select the source protocol as RIP.
Configure the metric.
Configure the metric type.
Configure the tag.
Enable the option.
Disable the option.
41.1 ip
RM CLI HiOS-3S RSP
Release 6.1 09/2016