Signal-Contact State; Signal-Contact Trap - Hirschmann Hios-3S Rsp Referenzhandbuch

Signal Contact

80.1.8 signal-contact state

Configure the Signal Contact manual state (only takes\nimmediate effect in
manual mode).

Mode: Global Config Mode

Privilege Level: Administrator

Format: signal-contact <P-1> state <P-2>
Parameter Value
signal contact no.
P-1
open
P-2
close

80.1.9 signal-contact trap

Configure if a trap is sent when the Signal Contact\nchanges state (in monitor
mode).

Mode: Global Config Mode

Privilege Level: Administrator

Format: signal-contact <P-1> trap
Parameter Value
signal contact no.
P-1

no signal-contact trap
Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no signal-contact <P-1> trap
880
Meaning
Open the signal contact (only takes
effect\nin the manual mode).
Close the signal contact (only takes
effect\nin the manual mode).
Meaning
80.1 signal-contact
RM CLI HiOS-3S RSP
Release 6.1 09/2016