Hirschmann HiOS-3S RSP Referenzhandbuch Seite 940

Access Control List (ACL)
[mirror]: Set Mirror Interface
[rate-limit]: Set rate limit and burst size.
[redirect]: Set Redirect Interface
[rate-limit]: Set rate limit and burst size.
[tos]: TOS
[time-range]: Activate the rule at an absolute time or periodically.
[assign-queue]: Configure the User Priority (VLAN priority)assignment
attribute.
[mirror]: Set Mirror Interface
[rate-limit]: Set rate limit and burst size.
[redirect]: Set Redirect Interface
[rate-limit]: Set rate limit and burst size.
[dscp]: DSCP
[time-range]: Activate the rule at an absolute time or periodically.
[assign-queue]: Configure the User Priority (VLAN priority)assignment
attribute.
[mirror]: Set Mirror Interface
[rate-limit]: Set rate limit and burst size.
[redirect]: Set Redirect Interface
[rate-limit]: Set rate limit and burst size.
every: Every pachet regardless the content.
[time-range]: Activate the rule at an absolute time or periodically.
[assign-queue]: Configure the User Priority (VLAN priority)assignment
attribute.
[mirror]: Set Mirror Interface
[rate-limit]: Set rate limit and burst size.
[redirect]: Set Redirect Interface
[rate-limit]: Set rate limit and burst size.
Parameter Value
string
P-1
any
P-2
a.b.c.d-e.f.g.h
eq
P-3
neq
lt
gt
RM CLI HiOS-3S RSP
Release 6.1 09/2016
Meaning
<name> ACL name.
Enter for any source ip address and mask.
Source IP address and mask (mask in wild-
card notation) e.g 192.168.1.1-0.0.0.255.
Specify value that port number must be equal
to.
Specify value that port number must not be
equal to.
Specify value that port number must be less
than.
Specify value that port number must be gre-
ater than.
3.3 ip
121