Hirschmann HiOS-3S RSP Referenzhandbuch Seite 939

Access Control List (ACL) 3.3 ip
deny: Create a new rule for the current IP access-list: Specify packets to
reject.
src: Specify the source IP and Mask
dst: Specify the destination IP and Mask
proto: Specify the protocol
[flag]: Specify TCP flag.
[icmp-type]: Specify ICMP type.
[icmp-code]: Specify ICMP code
[igmp-type]: Specify IGMP type.
[fragments]: Specify if rule matches on fragmented IP packets.
[precedence]: Precedence
[log]: Enable logging
[time-range]: Activate the rule at an absolute time or periodically.
[assign-queue]: Configure the User Priority (VLAN priority)assignment
attribute.
[tos]: TOS
[log]: Enable logging
[time-range]: Activate the rule at an absolute time or periodically.
[assign-queue]: Configure the User Priority (VLAN priority)assignment
attribute.
[dscp]: DSCP
[log]: Enable logging
[time-range]: Activate the rule at an absolute time or periodically.
[assign-queue]: Configure the User Priority (VLAN priority)assignment
attribute.
every: Every pachet regardless the content.
[log]: Enable logging
[time-range]: Activate the rule at an absolute time or periodically.
[assign-queue]: Configure the User Priority (VLAN priority)assignment
attribute.
permit: Create a new rule for the current IP access-list: Specify packets to
forward.
src: Specify the source IP and Mask
dst: Specify destination IP and Mask
proto: Specify the protocol
[flag]: Specify TCP flag.
[icmp-type]: Specify ICMP type.
[icmp-code]: Specify ICMP code
[igmp-type]: Specify IGMP type.
[fragments]: Specify if rule matches on fragmented IP packets.
[precedence]: Precedence
[time-range]: Activate the rule at an absolute time or periodically.
RM CLI HiOS-3S RSP
120
Release 6.1 09/2016