Dynamic ARP Inspection
12.1 ip
Set IP parameters.
12.1.1 ip arp-inspection verify src-mac
If enabled verifies the source MAC address in the ethernet packet against the
sender MAC address in a ARP request/response packet body. If disabled
does not perform this additional security check.
Mode: Global Config Mode
Privilege Level: Operator
Format: ip arp-inspection verify src-mac
no ip arp-inspection verify src-mac
Disable the option
Mode: Global Config Mode
Privilege Level: Operator
Format: no ip arp-inspection verify src-mac
200
12.1 ip
RM CLI HiOS-3S RSP
Release 6.1 09/2016