Vitek VT-1990W Betriebsanleitung Seite 14

ENGLISH
Symbols «ЕЕ0» on the display,
accompanied by 5 sound
signals
Smoke from the ventilation
openings (5)
The baked bread dropped,
the bottom part of the bread
is damp
The bread has stuck to the walls
of the baking form
The bread structure is not
homogeneous or the bread
went wrong
Delivery set
Bread maker – 1 pc.
Baking form – 1 pc.
Cookie tray – 1 pc.
Kneading paddle – 1 pc.
Measuring cup – 1 pc.
Measuring spoon – 1 pc.
Hook – 1 pc.
Technical specifications
Power supply: 230 V ~ 50 Hz
Maximal rated input: 600 W
The manufacturer reserves the right to change
the specifications of the unit without any prior
notice.
VT-1990 IM.indd 14
Temperature sensor
failure
Ingredients got onto the
heating element
The bread has stayed in
the bread maker for too
long after baking
The bottom part of the
bread has stuck to the
kneading paddle
Wrong mode is selected View the available baking programs,
Accidental pressing of
«START/STOP» button
during the operation
process
Frequent opening of the
lid during the operation
process
A long power cutoff
during the operation
process
The paddle is blocked
Unit operating life is 3 years.
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim un-
der the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
14
Switch the unit off and contact the
authorized service center
Switch the unit off by unplugging the
power cord plug from the socket. Take
the form out, let the unit cool down.
Wipe the walls of the process chamber
and the heating element with a wet
cloth.
When making bread according to this
recipe switch the unit off immediately
after the bread is ready
Grease the paddle with oil before
assembly
select another program by pressing
the «MENU» button repeatedly
Load all necessary ingredients again
and start the baking process from the
very beginning
Open the lid only upon the request
of the program in order to add
supplementary ingredients.
Load all necessary ingredients again
and start the baking process from the
very beginning
Take the form out and check if the
drive is rotating. In case of any defect
contact the authorized service center
20.01.2014 14:29:15