Parameterlisten - Aktivfilter - Danfoss VLT AutomationDrive FC 302 Low Harmonic Drive Produkthandbuch

Programmierung
6.4 Parameterlisten – Aktivfilter
6.4.1 0-** Betrieb/Display
Par. Nr. # Parameterbeschreibung
0-0* Basic Settings
0-01 Language
0-04 Operating state at power-up (hand)
0-1* Set-up Operations
0-10 Active set-up
0-11 Edit set-up
0-12 This set-up linked to
6 6
0-13 Readout: Linked set-ups
0-14 Readout: Edit set-ups/channel
0-2* LCP Display
0-20 Display line 1.1 small
0-21 Display line 1.2 small
0-22 Display line 1.3 small
0-23 Display line 2 large
0-24 Display line 3 large
0-25 My personal menu
0-4* LCP Keypad
0-40 [Hand on] key on LCP
0-41 [Off] key on LCP
0-42 [Auto on] key on LCP
0-43 [Reset] key on LCP
0-5* Copy/Save
0-50 LCP copy
0-51 Set-up copy
0-6* Password
0-60 Main menu password
0-61 Access to main menu w/o password
0-65 Quick menu password
0-66 Access to quick menu w/o password
106
Produkthandbuch
Werkseinstellung
[0] English
[1] Forced stop
[1] Set-up 1
[1] Set-up 1
[0] Not linked
0 N/A
0 N/A
30112
30110
30120
30100
30121
ExpressionLimit
[1] Enabled
[1] Enabled
[1] Enabled
[1] Enabled
[0] No copy
[0] No copy
100 N/A
[0] Full access
200 N/A
[0] Full access
Danfoss A/S © Version 06/2014 Alle Rechte vorbehalten.
4-Parametersatz Änderungen
während des
Betriebs
1 set-up TRUE
All set-ups TRUE
1 set-up TRUE
All set-ups TRUE
All set-ups FALSE
All set-ups FALSE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
1 set-up TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups FALSE
All set-ups FALSE
1 set-up TRUE
1 set-up TRUE
1 set-up TRUE
1 set-up TRUE
Umrechn Typ
ungsindex
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
0 Uint16
0 Int32
- Uint16
- Uint16
- Uint16
- Uint16
- Uint16
0 Uint16
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
0 Int16
- Uint8
0 Int16
- Uint8
MG37A203