The Control Panel; On/Off Button; Menu Button - Lakeland 19692 Bedienungsanleitung

THE CONTROL PANEL

Programme number

On/Off button

Timer buttons
Crust button
• Plug in and switch on the Small Space Bread Maker at the socket.
• The display screen will briefly illuminate and you will hear a beep.
• The display will look like the image above, showing the default setting of "1, 3:00".
ON/OFF BUTTON
• This button starts and stops the programme you have selected.
• Press this button to start. There will be a short beep and the two dots between the
'hour' and 'minute' on the display will flash, to show the programme has started.
• Press this button and hold until the maker bleeps to stop the programme. The display
will go back to the default setting again.

MENU BUTTON

• This button sets the programme you have selected.
• Press this button repeatedly to scroll through each programme, using the menu on the
lid as a guide. The maker will bleep each time and the programme number will show in
the display screen.
• See 'Bread Maker Programmes' to help you select your programme.
CRUST BUTTON
• This button allows you to select the colour you would like
your crust.
• Press the button to select a light, medium or dark coloured
crust, the arrow will move through the icons on the left hand
side of the display.
• See the table of Bread Maker Programmes to see which you
can use the crust button on.
Shows time in hours/minutes
until your bread is ready
Menu button
Loaf size button
7