The Control Panel And Programmes - Lakeland 16147 Gebrauchsanweisung

• An extension cable may be used with care. The electrical rating of the cable should be at least
as great as the appliance. Do not allow the cable to hang over the edge of the worktop or
touch any hot surfaces.
• This appliance complies with the basic requirements of Directives 04/108/EC (Electromagnetic
Compatibility) and 06/95/EC (Safety of Domestic Electrical Appliances)
• WARNING: a cut off plug inserted into a 13amp socket is a serious safety (shock) hazard.
Ensure the cut off plug is disposed of safely.
• The temperature of all surfaces marked with this symbol will be very hot when the appliance
is in use. DO NOT TOUCH these surfaces as possible injury could occur.
Allow to cool completely before handling this appliance.
• CAUTION: the plastic bags used to wrap this appliance or the packaging may be dangerous.
To avoid risk of suffocation, keep these bags out of reach of babies and children. These bags
are not toys.
• Do not use foil in the bread maker
• Do not operate empty.
• Do not touch any moving parts whilst in use.
• Do not lift or move the bread maker whilst in use.
• Do not cover the bread maker or block the air vents in the lid or sides whilst in use.
• Make sure there is plenty of air circulation around the bread maker.
• The bread pan will be very hot – always use oven gloves to remove the hot bread pan from the
oven chamber.
• The kneading paddle will be very hot after use, always use an oven glove or cloth when
handling.
• Do not place hands in the oven chamber after the bread pan has been removed as it will be
very hot.
6

The Control Panel and Programmes

Fig. 1
The bread maker does not have a separate on/off switch. Simply plug in and switch on at the
socket.
After switching on the Bread maker the LCD in the display screen will be illuminated and you will
hear a beep.
"1, 3:00" appears in the display screen and the arrow points to MEDIUM (see fig.1) this is the
default setting so it will show this every time you turn on the machine.
START/STOP
For starting and stopping the selected programme.
To START a programme, press the START/STOP button for approx 2 seconds. A short beep will be
heard and two dots in the time display begin to flash. The programme will start.
To STOP a programme, press the START/STOP button until you hear a beep. The beep indicates
that the programme has been switched off. The display screen will show the default setting again
(1, 3:00 – arrow pointing to MEDIUM)
PAUSE
Press the PAUSE button to interrupt the programme at any time (to add ingredients etc) the
machine will pause but the setting will be memorized for 10 minutes. The outstanding time will
flash on the display screen.
To continue the programme simply press the PAUSE button again.
MENU
The MENU button is used to set your selected programme.
Press the MENU button repeatedly to scroll through the menu – the programmes will show in the
display screen accompanied by short beeps.
Select your programme by pressing the screen repeatedly. When you see the number of the
programme you require together with the programme time – stop pressing.
7