Lakeland 19692 Bedienungsanleitung Seite 16

7. Look at the dough through the viewing window after a few minutes, to make sure all
the flour is incorporated into the dough. Sometimes flour may be left in the corners
of the bread pan. If this happens, quickly open the lid and use a non stick spatula to
loosen any flour, so it can be evenly mixed in.
8. When the programme cycle has finished, the Bread Maker will beep 10 times and the
display will show '0:00'. Indicating that the machine is in keep warm mode.
KEEP WARM
The Bread Maker will automatically keep bread warm for serving for 60 minutes
after it has finished baking if you do not switch the Bread Maker off.
This helps minimize moisture build up if the loaf is not removed from the Bread
Maker immediately after baking.
This function does not work on Programme 8 – DOUGH and Programme 9 – JAM.
For best results, remove the bread as soon as the programme is complete and
allow it to cool on a cooling rack.
9. To switch the Bread Maker off, press the on/ off button and hold until the maker
bleeps. The display will go back to the default setting (1 3:00). Switch off and unplug
the socket.
10. Open the lid. Using an oven glove, hold the bread pan handle and turn the bread pan
anti- clockwise to unlock and gently take the pan out of the machine.
11. Using oven gloves turn the bread pan upside down and gently shake the loaf onto
a cooling rack. If the loaf does not fall out straight away gently loosen the sides of the
loaf with a non stick spatula, knock the corner of the bread pan on a wooden board,
or rotate the base of the paddle stem underneath the bread pan, to help release it.
12. The kneading paddle may have stayed in the loaf when you take it out of the bread
pan. Use the hook supplied to remove the paddle from the loaf. Take care and use
oven gloves as the paddle will be very hot.
13. Leave the loaf to cool for at least 20 to 30 minutes, to allow the steam to escape; the
bread will be difficult to slice if hot.
The oven chamber will remain very hot after the bread pan has been removed. Do not
place hands inside, and allow it to cool completely with the lid open.
16