Manual Alarm Output Test; Manual Saved Telephone Number Test - Renkforce 751514 Bedienungsanleitung

11.8 Manual alarm output test

It is recommended that you occasionally test the alarm outputs manually.
In doing so you ensure that both the alarm outputs and the attached signalling devices (e.g.
siren, flashing light etc) are working correctly.
To manually test the alarm outputs, note the following input:
• Enter one of the 8 programmed user codes.
*
• Press the " " button.
• Press the "5" button.
• Press the "#" button for confirmation.
• The alarm outputs (clamp 6. 7 and 8) are activated for 3 seconds.

11.9 Manual saved telephone number test

You can manually test the correctness of the programmed telephone numbers. Inform the person to be
called beforehand that this is only a test!
Testing the first telephone number:
• Enter one of the 8 programmed user codes.
*
• Press the " " button.
• Press the "60" button.
• Press the "#" button for confirmation.
Testing the second telephone number:
• Enter one of the 8 programmed user codes.
*
• Press the " " button.
• Press the "61" button.
• Press the "#" button for confirmation.
Testing the third telephone number:
• Enter one of the 8 programmed user codes.
*
• Press the " " button.
• Press the "62" button.
• Press the "#" button for confirmation.
138