Deleting A Telephone Number; Programming Telephone Numbers For Telephone Systems - Renkforce 751514 Bedienungsanleitung

10.13.1 Deleting a telephone number

To delete a telephone number, enter the memory location and press the "#" button.

10.13.2 Programming telephone numbers for telephone systems

Some older telephone systems require that a dial-in digit be entered, followed by a short pause, to allow
the outside line to be activated before the actual telephone number can be called. This is usually "0".
Please refer to your telephone system operating instructions. A pause of approx 2 seconds is normally
fully sufficient.
Ensure that the signal transmission is deactivated.
Example:
63 > 1 > 0 > PAUSE > 2 > PAUSE > 0987654321 > #
Explanation:
63 Memory location for telephone number
Code selection for the voice message
1
0 0 for the outside line
Activation of the pause
PAUSE
2 Entered pause time (pause can vary from 1 to 99 seconds)
End of the pause entry
PAUSE
0987654321 Telephone number
# Ende der Programmierung
119