Renkforce 751514 Bedienungsanleitung Seite 122

Example 2:
You have programmed 3 telephone numbers.
The call sequence is set to 2.
Message repetitions is set to 2
The call confirmation code is set to 0 (factory setting).
In an alarm situation the sequence with confirmation is as follows:
Telephone number
1st number
2nd number
3rd number
2nd number
3rd number
122
Text message
1st repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
Confirmation with button 1.
You can now listen to the room
for a predefined period of time
and then the telephone dialler
hangs up.
Telephone dialler hangs up
Telephone dialler hangs up
Telephone dialler hangs up
Telephone dialler hangs up