Landing Gear Installation; G) Inserting The Flight Battery - Reely SKY Condor Bedienungsanleitung

f) Landing Gear Installation
Push the landing gear (1) into the plastics receptacle (2).
Then push the safety plate (3) into the free space and attach it with the included
screw.
Install the main landing gear legs accordingly.

g) Inserting the Flight Battery

For flight battery (1) (not included), a special retraction in the area in front of the
cockpit forms the battery compartment.
The flight battery is vertically pushed into the battery compartment through the
cockpit.
To stop the flight battery from displacing during flight, it is especially important
that the battery is correctly positioned in the compartment intended for it.
Attention!
Always remove the flight battery from the model for recharging.
Never recharge the battery in the model.
The heat generated by the recharging process may deform the
material around the fight battery and cause severe damage to the
model.
36
Figure 15
Figure 16
Figure 17