Trimming The Model; D) The First Landing - Reely SKY Speed Flyer Bedienungsanleitung

c) Trimming the model
If in straight flight your model shows the tendency to drift to one direction, correct the neutral position of the corresponding
rudder via the trimming.
Flay a few circles at a safe height to get used to the way the model steers.
Warning!
The compact construction means that you should not let the plane fly too far away and always ensure
sufficient flight speed.

d) The first landing

Don't spend too long flying on the first flight, try to land the model relatively quickly again instead. This allows you
enough time to make several landing approaches without having to worry about the battery running out.
In order to land the model as gently as possible, try to reduce the flight speed as much as possible directly before
touchdown.
Caution – important!
After landing check the battery and motor temperature immediately. If the temperatures are too high,
you may need to make additional air inflow and/or outflow holes to improve fuselage ventilation.
45