D) Button Sound Effect/Alarm Signal; E) Reset Settings To Factory Defaults - Eurochron EFWS5008 Bedienungsanleitung

(C10)
Calendar date
(C10)
Calendar year
(C12)
CLR
(C18) Temperature unit
(C21)
Barometric pressure unit
(C1)
Weather

d) Button sound effect/Alarm signal

Note that disabling the beeper disables it for buttons and alarms.
The button sound effect (beeper) can be enabled and disabled. Press and hold the HISTORY/–
button to toggle between on and off. BUZZ ON or BUZZ OFF is displayed accordingly for a
short time.

e) Reset settings to factory defaults

If you wish to reset all settings to their factory default settings take the following steps:
1. Remove the batteries.
2. Hold down the HISTORY/– button.
3. While still holding down the HISTORY/– button, insert the batteries.
4. RESET shows in the display and all settings are reset.
56
Set the date
Set the year
Enable/disable automatic clearing of max./min
value records (on / off)
Select the temperature unit (°C / °F)
Select the barometric pressure unit
(mmHg / inHg / hPa)
Set the initial condition of the weather forecast
(select the icon that best suits your current
weather condition). Select between: Sunny /
Partially cloudy / Cloudy / Rainy.