F) Wall Mounting; G) Personalize Weather Station Settings; H) Calibrate The Weather Station; I) Set Notifications - Eurochron EFWS5008 Bedienungsanleitung

f) Wall mounting

Installation must be carried out by qualified personnel only. Incorrect installation can
result in severe personal injury and property damage. Check for installations such as
electrical wiring and plumbing that may be buried inside the wall.
Use an electronic stud finder to check the wall type before drilling and mounting.
1. Fix a screw at the location you want the device to be hung.
- Ensure the hang hole of the device (A1, B1) fits over the screw head.
- Depending on the surface different mounting material may be required (not supplied).
2. Hang the device.

g) Personalize weather station settings

In order to make best use of the weather station you are advised to adjust settings (e.g. time,
date, current weather, ...) to your personal needs.
Chapter '11. Settings' on page 54 guides you through the necessary steps and settings.

h) Calibrate the weather station

Before you start using the weather station in a real environment (as opposed to testing), you
are advised to calibrate the weather station, if possible. Proper calibration requires a calibrated
source to compare against.
Chapter '15. Calibration' on page 61 guides you through the necessary steps and settings.

i) Set notifications

The weather station is equipped with a notification system in form of alarms. You can set
threshold values for different types of measured values. When a threshold is reached you are
alerted by audible and visual signal.
Chapter '14. Alarm' on page 59 guides you through the necessary steps and settings.
49