D) Reset; Alarm Clock; Setting The Alarm; B) Turning Off Alarm Signal - Eurochron EFWS 260 Bedienungsanleitung

d) Reset

Press the RESET button (5) (e.g. using a paper clip) to delete all the settings and reset the
weather station to the default factory settings.

12. Alarm clock

a) Setting the alarm
• In normal display mode, press and hold the ALARM button (8) for approx. 2 seconds. The
indicator OFF flashes.
• Press the + (6) or - (7) button to activate (ON) or deactivate (OFF) the alarm.
The bell icon (P) is shown on the display when the alarm is activated.
• Press the SET button (2) to confirm. The hour indicator flashes.
• Press the + or - button to change the value. Press and hold the button for fast setting.
• Press the SET button to confirm. The minute indicator flashes.
• Set the minutes and confirm with the SET button.
• If you don't press any button for 30 seconds, the last set value is accepted and the weather
station switches to normal display mode.
• If necessary, press the LIGHT/SNOOZE button (1) to exit setting mode immediately.

b) Turning off alarm signal

• When the alarm sounds, press the LIGHT/SNOOZE button to activate the snooze function.
The bell icon flashes. The alarm clock will ring again in 10 minutes.
• Press any other key to turn off the alarm signal directly.
• The alarm signal will turn off after 2 minutes if no button is pressed.
33