C) Pressure - Eurochron EFWS5008 Bedienungsanleitung

2. Press the HISTORY/– or CHANNEL/+ buttons repeatedly to adjust the reading.
- Values are incremented in 1 % steps.
- Press the ALARM button to reset current setting to 0.
3. Press the SET button to enter outdoor humidity calibration mode of the first sensor.
4. Press the HISTORY/– or CHANNEL/+ buttons repeatedly to adjust the reading.
- Press the ALARM button to reset current setting to 0.
5. If you have more than one outdoor sensor, press the SET button to select the next channel
and repeat the adjustment process.
6. Press the SNOOZE/LIGHT button to exit when completed.

c) Pressure

1. Press and hold the SET and ALARM buttons for 5 seconds to enter absolute pressure
calibration.
- Calibration mode automatically exits if no input is registered for the next 30 seconds.
2. Press the HISTORY/– or CHANNEL/+ buttons repeatedly to adjust the reading.
- Values are incremented in 0.1 steps.
- Press the ALARM button to reset current setting to 0.
3. Press the SNOOZE/LIGHT button to exit when completed.
62