B) Clearing Of Max/Min Values; C) Date/Time/Units/Data Records - Eurochron EFWS5008 Bedienungsanleitung

b) Clearing of max/min values

A utomatic clearing
1
When automatic clearing is enabled (icon
the past 24 hours are cleared automatically every day at midnight.
Section 'c) Date/Time/Units/Data records' on page 55 guides you through the necessary steps
and settings.
M anual clearing
2
1. Press the ALARM button. MAX shows in the display.
2. Hold down the SET button to clear readings. CLR flashes in the display. When CLR goes
out, record clearing is completed.
3. Press the ALARM button. MIN shows in the display.
4. Hold down the SET button to clear readings. CLR flashes in the display. When CLR goes
out, record clearing is completed.
5. Press the SNOOZE/LIGHT button to exit when completed.

c) Date/Time/Units/Data records

1. Press and hold the SET button until the first setting flashes.
2. Press the HISTORY/– or CHANNEL/+ button to adjust setting.
3. Press the SET button to save setting and move to the next setting. Possible settings are
listed in the table below.
4. Press the SNOOZE/LIGHT button to exit anytime.
Adjustable Settings
RCC (Radio-controlled Clock)
Time zone
(C15) Time format
(C15)
Clock time (hour)
(C15)
Clock time (minute)
Calendar date format
(C10) Calendar month
shows in display) (C12), max/min readings of
Enable/disable date/time synchronization via
DCF signal.
-12 / +12 hours
Select the time format (12 hour / 24 hour)
Set the hour
Set the minute
Select date format (DD/MM / MM/DD)
Set the month
55