Snooze Function ("Snooze"); Stopping The Alarm Signal - Eurochron EFWS 700 Bedienungsanleitung

All manuals and user guides at all-guides.com
d) Snooze Function ("SNOOZE")
Once the alarm signal for the set waking time has been started,you may activate
the snooze function by briefly pushing the button "SNOOZE/LIGHT" (3).
The alarm signal is then interrupted for about 5 minutes. During this time, the symbol
" " flashes (K).
Then the waking signal is started again.
The alarm signal can be interrupted up to 7x.
e) Stopping the Alarm Signal
To stop the alarm signal, push any button (except for "SNOOZE/LIGHT"; it activates
the snooze function; see chapter 13. d).
The waking signal is triggered again at the same time on the next day.
To switch off the alarm signal (e.g. at the weekend), proceed as described in
chapter 13. c).
53