Scope Of Delivery; Accessories; Options - Elektro-Automatik ELR 9000 Betriebsanleitung

1.9.3

Scope of delivery

1 x Electronic load device
1 x Share Bus plug
1 x Remote sensing plug
1 x 1.8 m USB cable
1 x Set of DC terminal cover(s)
1 x USB stick with documentation and software
1 x AC connector plug (clamp type)
1 x Set for strain relief
1.9.4

Accessories

For these devices the following accessories are available:
Digital interface modules
IF-AB
Automatic Isolation Unit
ENS2
1.9.5

Options

These options are not retrofittable as they are permanently built in or preconfigured during the manufacturing process.
CABINET
19"-rack
3W
GPIB interface
EA Elektro-Automatik GmbH
Helmholtzstr. 31-33 • 41747 Viersen
Germany
Pluggable and retrofittable AnyBus interface modules for RS232, CANopen,
Ethernet, Profibus, ProfiNet, ModBus or CAN are available. Others upon request.
Details about the interface modules and the programming of the device using
those interfaces can be found in separate documentation. It is usually available
on the USB stick, which is included with the device, or as PDF download on the
Elektro-Automatik website.
External automatic isolation unit (AIU, former german name: ENS) with contactors
(for one ELR 9000 up to 10.5 kW) or without contactors (bigger system where
contactors are installed by the user), which might be required to be installed for
the operation of an energy recovering device which is connected to a public grid.
This option can be purchased separately and retrofitted by the user on location.
Only for use with european models, not compatible with US models!
Racks in various configurations up to 42U as parallel systems are available, or
mixed with power supply devices to create test systems. Further information in
our catalogue or upon request
Replaces the standard slot for pluggable interface modules by a rigidly installed
GPIB port. This option can be retrofitted upon request. The device will keep the
USB and analog interfaces. Via the GPIB port, it can only support SCPI commands.
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
ELR 9000 Series
www.elektroautomatik.de
ea1974@elektroautomatik.de
Page 27