Elektro-Automatik ELR 9000 Betriebsanleitung Seite 103

7 kW
Analog interface
(3
Set value inputs
Actual value output
Control signals
Status signals
Galvanic isolation to the device
Sample rate (set value inputs)
Insulation
Input (DC) to enclosure
Input (AC) to input (DC)
Environment
Cooling
Ambient temperature
Storage temperature
Digital interfaces
Featured
Slot for AnyBus modules
(2
Galvanic isolation to the device
Terminals
Rear side
Front side
Dimensions
Enclosure (WxHxD)
Total (WxHxD)
Standards
Weight
Article number
(3
(1 For technical specifications of the analog interface see „3.5.4.4 Analog interface specification" on page 60
(2 Only in the standard version
(3 Article number of the standard version, devices with options will have a different number
(4 From production date 07/2015
EA Elektro-Automatik GmbH
Helmholtzstr. 31-33 • 41747 Viersen
Germany
ELR 9080-340 ELR 9250-140 ELR 9500-60
U, I, P, R
U, I
DC on/off, Remote on/off, R mode on/off
CV, OVP, OT
max. 1500 V DC
500 Hz
DC minus: permanent max. 400 V
DC plus: permanent max. 400 V + max. input voltage
Max. 2500 V, short-term
Temperature controlled fans
0..50 °C
-20...70 °C
1x USB-B for communication, 1x USB-A for functions and HMI firmware updates, 1x
Master-slave bus, 1x GPIB (optional)
optional: CANopen, Profibus, Profinet, RS232, CAN, Ethernet, ModBus TCP
max. 1500 V DC
Share Bus, DC input, AC input/output, remote sensing, analog interface, USB-B,
master-slave bus, AnyBus module slot
USB-A
19" x 3U x 609 mm
483 mm x 133 mm x 714 mm
EN 60950, EN 50160 (grid class 2)
24 kg 24 kg
33200405 33200406
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
ELR 9000 Series
Model EU
ELR 9750-44
(4
24 kg 24 kg
33200407 33200408
www.elektroautomatik.de
ea1974@elektroautomatik.de
ELR 91000-30
24 kg
33200409
Page 13