AsViva RA6 O Benutzerhandbuch Seite 89

METER INSTRUCTION
ENTER
"D. SET THE DESIRED CALORIES and YOUR
button and then
NOTE for CALORIES:
NOTE: Although the console allows input for ages beginning at 10 years old, the product is not
recommended for children's use
ENTER
"E. SET THE TORQUE/RESISTANCE
button and then
START/ STOP
"F. START EXERCISE"
button: Press
" G. DURING WORKOUT, ALWAYS MONITOR YOUR CURRENT HEART RATE
input, the console will turn off the pulse circuit. The console will then display an error message "P". Place
your hands back on the Pulse Sensors correctly, the pulse readout will appear again
UP or DOWN
ENTER
button:
UP or DOWN
a. Press button to confirm the CALORIES value and enter the mode to set
the AGE
b. Use
OLD INCREMENT)
UP or DOWN
LEVEL"
button:
d. The USER SETTING PROGRAM allows the user to manually set the
torque/resistance level, the console will divide the time into 10 intervals. The user
ENTER
could through their preference to set the desired torque/resistance level in each
time interval
e. Press
EACH TIME INTERVAL OF TORQUE/RESISTANCE LEVEL (1 TO 16
TORQUE/RESISTANCE LEVELS; 1 TORQUE/RESISTANCE LEVEL
INCREMENT), then press ENTER button to confirm
f. Continue following the above process to finish setting the preference
TORQUE/RESISTANCE LEVEL in 10 time intervals. The program profile
will be storied in the memory after setup. You can modify the profile anytime
START/ STOP
under the STOP mode
NOTE for HEART RATE:
You must place both of your hands on the Pulse Sensors located on the Seat
Handlebar. Your pulse will be displayed approximately few seconds after the
heart symbol "
If you do not place your hands correctly and a few seconds pass without a pulse


AGE"
buttons to set your AGE (10 TO 99 YEARS OLD; 1 YEAR
button to confirm the AGE value and enter the mode to set the
to begin exercise. "START" would then appear to the screen
" is displayed
STATUS"
89 / 96