AsViva RA6 O Benutzerhandbuch Seite 64

ASSEMBLY INSTRUCTION
1. A bottle of silicone is packed together with user's manual.
2.Gently apply the silicone to the rollers sliding path
(inner upper side and inner bottom side) on the aluminum rail.
Note: Apply liberally but be cautious not to spill the lubricant as
applied surfaces will become very slippery. To clean spills use warm soapy water, repeat if
necessary.
3. Then slowly slide the Seat forward and backward for a few seconds allowing the lubricant spread
evenly on the rollers sliding path on aluminum rail.
STEP 6
Lubricate the silicone to
the rollers sliding path on
the aluminum rail.
64 / 96