AsViva RA6 O Benutzerhandbuch Seite 88

METER INSTRUCTION
"B. SET THE DESIRED TIME or DESIRED DISTANCE
To avoid the user to select TIME and DISTANCE in the same program to confuse the user couldn't
distinguish which one (TIME or DISTANCE) as the first priority. User could only select TIME or
DISTANCE in the same program, one at the time
If you would like to select TIME value, not
UP or DOWN
DISTANCE value:
button:
USER MODE PROGRAM (P13 ~ P16)
e.
After pressing the
f. UP or DOWN
the TIME function mode will appear with the
display flashing "0:00"
Use
TIME (1:00 TO 99:00; 1 MINUTE INCREMENT)
NOTE for TIME:
Count Up: If a target time was not selected,
TIME will count up from 0:00 to maximum 99:59
minutes
Count Down: If you have set the target time, the
console will count down from that selected
target time down to 0:00
ENTER
"C. SET THE DESIRED CALORIES and YOUR
button and then
NOTE for CALORIES:
Count Up: If target calories was not selected, this would measure total calories burned during exercise

Count Down: If you have set the preference value of calories, the console will count down from that
selected value down to 0



ENTER
button to enter into
buttons to set the desired
ENTER
UP or DOWN
button:
UP or DOWN
a. Press button to confirm TIME or DISTANCE value and enter the mode to set
the CALORIES
b. Use
KCAL INCREMENT)
If you would like to select DISTANCE value, not
ENTER
TIME value:
button and then
USER MODE PROGRAM (P13 ~ P16)
a. After pressing the
,
the TIME function mode will appear with the
display flashing "0:00"
b. Press the
UP
function mode will then appear with the display
flashing "0.0"
c. Use
DISTANCE (1 TO 999KM/MILE; 1 KM/MILE
INCREMENT)
NOTE for DISTANCE:
Count Up: If a target distance was not selected,
this would measure the total distance from 0:00
to 999 km/mile
Count Down: If you have set the target distance,
the console will count down from the selected
target time down to 0
AGE"
buttons to set the desired CALORIES (10 TO 9990KCAL; 10


UP or DOWN
ENTER
button to enter into
ENTER
button again, the DISTANCE
or DOWN
buttons to set the desired
button:
,
88 / 96