AsViva RA6 O Benutzerhandbuch Seite 63

ASSEMBLY INSTRUCTION
STEP 5
Adjustment Pad
1. Insert the SENSOR WIRE(29) and PULSE CONNECTION WIRE(75) into the bottom end of
METER POST(31) and pull them out of the top of the METER POST(31). Pull the HANDLEBAR(25),
twist the STRAP(21) and slide the strap thru the gap into the hole in the bottom of the METER
POST(31). Slide the METER POST(31) onto the MAIN FRAME(1) and secure with
SCREW(M5x18mm)(84).
2. Plug the SENSOR WIRE(29) and PULSE CONNECTION WIRE(75) to the METER(30) and push
the excess wires back into the METER POST(31). Attach the METER(30) onto the METER
POST(31) with two BOLT, BUTTON HEAD M5x0.8x12mm(115).
NOTE: Please be careful not to damage the SENSOR WIRE when attaching the METER(30).
3. Refer to FIG. 1 above. Turn counter clockwise the Adjustment Pad until it stands on the ground
completely to ensure the stability when using.
63 / 96