AsViva RA6 O Benutzerhandbuch Seite 86

METER INSTRUCTION
START/ STOP
"F. START EXERCISE"
button: Press
"G. DURING WORKOUT, ALWAYS MONITOR YOUR CURRENT HEART RATE
NOTE for HEART RATE:
You must place both of your hands on the Pulse Sensors located on the Seat Handlebar. Your pulse will
error message "P". Place your hands back on the Pulse Sensors correctly, the pulse readout will appear
again
"H. DURING WORKOUT, THE TORQUE/TENSION LEVEL IS EASILY CHANGED AT ANY
I. DURING WORKOUT, HOW TO REVIEW SPEED, DISTANCE, CALORIES, RPM, ODO (ODOMETER) AND
WATT"

During workout (after pressing
CALORIES, or RPM, ODO (Odometer) and WATT
.
ENTER
About ODO (odometer), the function is similar to DISTANCE, will accumulate the total distance traveled by the
RPM, ODO, WATT will show at the same time SPEED, DISTANCE, CAL. will show at the same time
item during workout
and at the same time to let the motor automatically calibrate to reset ODO value to zero
START/ STOP
be displayed approximately few seconds after the heart symbol "
displayed
If you do not place your hands correctly and a few seconds pass without a pulse
input, the console will turn off the pulse circuit. The console will then display an
UP or DOWN
button: You can change the torque/tension level (from 1 to 16 levels)
at any time during workout by pressing
START/STOP

If there is any necessary to reset ODO's distance value, press
to begin exercise. "START" would then appear on the screen
UP or DOWN
), the user could press
STATUS"
button.
MODE
to select SPEED, DISTANCE and
UP
,
" is
TIME"
MODE DOWN
,
86 / 96