AsViva RA6 O Benutzerhandbuch Seite 84

METER INSTRUCTION
B. SET THE DESIRED TIME or DESIRED DISTANCE
To avoid the user to select TIME and DISTANCE in the same program to confuse the user couldn't
distinguish which one (TIME or DISTANCE) as the first priority. User could only select TIME or
DISTANCE in the same program, one at the time
If you would like to select TIME value, not
UP or DOWN
DISTANCE value:
button:
H.R.C. PROGRAM (P9 ~ P12)
ENTER
c. After pressing the
UP or DOWN
function mode will appear with the display flashing
"0:00"
d. Use
TIME (1:00 TO 99:00; 1 MINUTE INCREMENT)
NOTE for TIME:
 Count Up: If a target time was not selected, TIME
will count up from 0:00 to maximum 99:59 minutes
 Count Down: If you have set the target time, the
console will count down from that selected target
time down to 0:00
ENTER
"C. SET THE DESIRED
button and then
KCAL
INCREMENT)
NOTE for CALORIES:
Count Up: If target calories was not selected, this would measure total calories burned during exercise
Count Down: If you have set the preference value of calories, the console will count down from that
selected value down to 0


button to enter into
, the TIME
buttons to set the desired
ENTER
UP or DOWN
CALORIES"
button:
a Press button to confirm the TIME or DISTANCE value and enter the mode to
UP or DOWN
set the
CALORIES
b. Use
If you would like to select DISTANCE value, not
ENTER
TIME value:
button and then
H.R.C. PROGRAM (P9 ~ 12)
a. After pressing the
ENTER
function mode will appear with the display flashing
"0:00".
b. Press the
UP
function mode will then appear with the display
flashing "0.0"
c. Use
DISTANCE (1 TO 999KM/MILE; 1 KM/MILE
INCREMENT)
NOTE for DISTANCE:
 Count Up: If a target distance was not
selected, this would measure the total
distance from 0:00 to 999 km/mile
 Count Down: If you have set the target
distance, the console will count down from the
selected target time down to 0
buttons to set the desired CALORIES (10 TO 9990KCAL; 10
UP or DOWN
ENTER
button to enter into
button again, the DISTANCE
or DOWN
buttons to set the desired
button:
, the TIME
84 / 96