f) Reverse Function for Steering
If you turn the steering wheel (3) to the left, but the vehicle steers to the right, you must activate the Reverse function
for the steering.
Proceed as follows:
• Switch on the transmitter. Wait until the display of the battery/rechargeable battery voltage appears and the trans-
mitter is ready for operation.
• Keep the two buttons " " and " " pushed at the same time for one second so that the setting menu is called. The
upper left display shows "
• Push the button " " or " " briefly repeatedly until "
• Change the setting between "REV" and "NOR" with the button "-" or "+".
• If you do not push any buttons for 5 seconds, the setting is saved and the setting menu left.
g) Reverse Function for Forward and Reverse Driving
If you pull the control lever at the transmitter towards the handle while the vehicle runs backwards, you need to acti-
vate the reverse function for forward/reverse driving.
Proceed as follows:
• Switch on the transmitter. Wait until the display of the battery/rechargeable battery voltage appears and the trans-
mitter is ready for operation.
• Keep the two buttons " " and " " pushed at the same time for one second so that the setting menu is called. The
upper left display shows "
• Push the button " " or " " briefly repeatedly until "
• Change the setting between "REV" and "NOR" with the button "-" or "+".
• If you do not push any buttons for 5 seconds, the setting is saved and the setting menu left.
".
".
ST" is displayed.
TH" is displayed.
47