j) Setting the Volume for the Sound Generator
The volume for the sound generator can be changed directly via the setting menu.
Proceed as follows:
• Switch on the transmitter. Wait until the display of the battery/rechargeable battery voltage appears and the trans-
mitter is ready for operation.
• Keep the two buttons " " and " " pushed at the same time for one second so that the setting menu is called. The
upper left display shows "
• Push the button " " or " " briefly repeatedly until "
• Change the setting with the buttons "-" or "+" (set value 0 - 100 in steps of 10).
• If you do not push any buttons for 5 seconds, the setting is saved and the setting menu left.
50
".
" is displayed.