Important Information On The Location Of The Telephone; Assembling The Telephone - Auerswald COMfortel 1200 Inbetriebnahmeanleitung

Further Steps
– In order to use the headset for calls, enable the headset operation at the
end of commissioning (in functions > headset).

Important Information on the Location of the Telephone

Requirements
– Existing connections in the immediate vicinity of where the telephone is
placed:

Note: The telephone can be operated not only on an internal S
also on a U
nected. Also see the instructions of the PBX.
Warning: Liquid entering the casing can cause life-threatening electric
shocks and damage or destroy the telephone.
 Only operate the telephone in closed, dry rooms.
 Only clean the casing of the device with a slightly moist cloth or an anti-
Caution: Mechanical stress and electro-magnetic fields can result in dam-
age to or destruction of the device or impairment of its functions.
 Avoid mechanical loads (e.g. vibrations).
 Avoid the proximity of devices which radiate electro-magnetic fields (for
 Do not expose the device to direct sunlight.
 Protect the device from dirt, excessive dust, condensation, caustic
 Note the values for ambient temperature and humidity given in the tech-

Assembling the Telephone

•
Place the telephone on a clean, flat surface.
Caution: Some paints or plastics used on furniture may react chemically
with the plastic feet on the device and cause them to soften. Plastic chem-
COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015
ISDN socket outlet connected to the PBX
port on the PBX. Only one telephone per U
P0
static cloth.
example, radio sets, professional radio equipment, amateur radio
equipment, mobile phones, DECT systems, WLAN routers, etc.).
liquids, and steam.
nical data.
Preparation
port but
0
port can be con-
P0
43