Connecting A Headset; Important Information On The Location Of The Telephone - Auerswald COMfortel 600 Bedienungsanleitung

Connecting a Headset

Requirements
– A wired headset corresponding to the technical data listed on
Insert the headset connector into the socket labelled with
1.
of the telephone.
Guide the cable to the outside using the corresponding cable channel.
2.

Important Information on the Location of the Telephone

Requirements
– Existing connections in the immediate vicinity of where the telephone is
placed:
Warning: Liquid entering the casing can cause life-threatening electric
shocks and damage or destroy the telephone.
Caution: Mechanical stress and electro-magnetic fields can result in dam-
age to or destruction of the device or impairment of its functions.
COMfortel 600 - Setup and Operation Guide V03 01/2016
Analogue socket connected to the PBX or provided by the network pro-
vider
Only operate the telephone in closed, dry rooms.
Only clean the casing of the device with a slightly moist cloth or an anti-
static cloth.
Avoid mechanical loads (e.g. vibrations).
Avoid the proximity of devices which radiate electro-magnetic fields (for
example, radio sets, professional radio equipment, amateur radio
equipment, mobile phones, DECT systems, WLAN routers, etc.).
Do not expose the device to direct sunlight.
Protect the device from dirt, excessive dust, condensation, caustic
liquids, and steam.
Note the values for ambient temperature given in the technical data.
Preparation
page 42.
on the bottom
49